Companion alcohol burner for wood stoves

Always good to have some helpful tips when making stove.
Where to get materials cheap, what tool is best.
How to do a specific task. Anything that will help.
Post Reply
User avatar
zelph
Posts: 15834
Joined: Tue Aug 14, 2007 1:53 pm

Companion alcohol burner for wood stoves

Post by zelph » Thu Jul 15, 2010 11:15 am

For those of you that use wood burning stoves an easy companion alcohol stove to make would be on the same line as this one made from a Fancy Feast cat food can or use a smaller can from a lunchables tuna and crackers kit. Don't open the can, turn it upside down and drill a 1/2" hole in the bottom. Take it outside, put it in a pail of water, get the garden hose out, fill the pail 3/4, put the can of food in the pail holding it with right hand, use hose nozzle to spray a jet of water into hole in can to force out contents. Start out by drilling four 1/8" holes in top of can equally spaced around outer top edge of can. Use a penny to cover hole once fuel has been added to stove. Place burner onto primer pan(or add primer wick around can base :roll: ) add primer, light and see how jets work. Add more holes if necessary.

I have not made one but this sounds like it should work just fine.

This might be of help to someone out there looking for a new stove to make. Make one and let us know how it turns out ;)

These photos were borrowed from the thread: viewtopic.php?f=2&t=38

Image Latest production version.
ImageImageImageImageImageImage

I made a batch of these stoves and gave them away as a prize for stove of the month and for guessing the items in the What is It forum. Anyone out there used the stove yet?
http://www.woodgaz-stove.com/

Post Reply